Anyone buying IPv4 space right now needs to understand how block prices move before signing anything. The free pool has been gone since 2015, and what’s left is a secondary market where /24 blocks typically trade between $25 and $50 per address. Timing matters. So does block size, and so does regional demand — any of these can swing pricing by 20% or more. This guide covers the trends, the drivers, and how to evaluate an offer before you commit to a transfer agreement.
Why IPv4 Block Price Trends Matter in Today’s Market
IPv4 addresses are finite, and they appreciate. That combination shapes everything. After the IANA free pool ran dry in 2011, the regional registries (ARIN, RIPE NCC, APNIC, LACNIC) exhausted their own pools not long after, and prices have climbed steadily ever since — from roughly $5 per address in 2014 to $30–$50 per address in recent years. Mistime a purchase by a few months and you can easily pay thousands more. Do the math on a single /24: 256 addresses at $40 each is over $10,000. A /16? That can run past $1.5 million.
Trends matter for leasing decisions too. When purchase prices rise, lease rates usually follow. So if you’re leasing today, it’s worth watching whether buying would actually be cheaper than recurring rental fees — at current rates, that breakeven point often arrives within three to five years.
Need IPv4 addresses?
Browse clean, RIPE-verified subnets at $0.50/IP/month.
Tip: Track quarterly pricing reports and RIR transfer listings. It’s the only reliable way to tell genuine market movement apart from short-term noise caused by a handful of large block sales.
Key Factors That Influence IPv4 Block Pricing
Not all blocks are priced equally — not even close. Before you evaluate trends, you need to know what moves the value of an individual block:
- Block size: Smaller blocks (a /24 or /23) command a premium per address. They suit smaller operators and they’re easier to resell. Large blocks like /16s or /19s often trade at a slight discount per address, but they attract enterprise and ISP buyers.
- RIR region: RIPE and ARIN blocks dominate market volume. APNIC and LACNIC blocks may carry premiums where demand outstrips available inventory. ARIN blocks, meanwhile, need careful registry history verification because of legacy (pre-1999) complexity.
- Registry history and cleanliness: Blocks with a history of abuse — spam, hijacking, blacklisting on DNSBLs — can lose 10–30% of their value, or require costly cleanup before you can even use them.
- Type: Contiguous blocks are preferred over fragmented ranges. Swipped and properly documented blocks transfer faster and price higher.
- Market liquidity: When cloud providers and hyperscalers show up as buyers, upward pressure intensifies across every region.
How to Analyze IPv4 Block Price Trends Before You Buy
Good analysis pulls from multiple sources. Relying on a single listing price is a mistake — I’d go further and say it’s the most common one buyers make:
- Compare across brokerages and marketplaces. Asking prices and actual closing prices are two different things. Verified marketplaces like IP4 Market provide transaction-backed pricing and vetted sellers, which gives you a far more accurate baseline than unverified listings.
- Normalize per-address cost. Always convert asking prices to dollars per IP address. It’s the only fair way to compare blocks of different sizes.
- Track RIR transfer statistics. ARIN and RIPE publish monthly transfer data. Rising volumes with flat or falling prices can signal increasing liquidity — and better negotiating leverage for you as the buyer.
- Assess historical trajectory. Prices have generally risen 10–15% annually over the past decade. Treat offers significantly below trend as potential red flags; they deserve extra due diligence before you touch them.
- Model your alternatives. Compare the purchase cost against a three- to five-year lease projection, factoring in current lease rates of roughly $0.30–$0.50 per address per month.
Normalized pricing data, registry statistics, and a clear view of your own capacity roadmap — put those three together and you walk into negotiations informed, rather than accepting the first quote someone throws at you.
Price Differences by RIR Region and Block Size (/24 vs. /16)
Where a block is registered affects what it sells for. ARIN blocks have historically carried a premium of roughly 10–20% over RIPE ones, mostly because ARIN transfers come with clean, well-documented histories and an M&A validation process that rarely surprises anyone. RIPE NCC blocks, by contrast, require legacy holder verification and often drag along messier routing histories, which pushes their prices down a bit. APNIC blocks usually land somewhere in between, and growing demand from Southeast Asian buyers has been narrowing that gap for a while now.
Size matters just as much as region. Smaller blocks in the /24 to /27 range trade at a per-address premium. Why? They’re easier to deploy, easier to finance, and attractive to smaller hosting providers and enterprises. A /24 might fetch $55–$65 per address, while the same addresses inside a /16 often price closer to $45–$55. Larger blocks also sit on the market longer, which gives buyers more negotiating leverage — but it demands more working capital up front.
Practical tip: If your roadmap only requires 256–512 addresses today, buying a single /24 usually beats purchasing a slice of a larger block. Clean small blocks keep their liquidity and are far easier to resell if your needs change.
Common Mistakes Buyers Make When Timing the Market
Even well-funded buyers undermine their own position by walking in with flawed assumptions. The errors we see most often:
- Waiting for a price correction that never comes. Buyers have been predicting an IPv4 collapse since 2015. Prices have dipped during demand slowdowns, sure, but the long-term trajectory has been steadily upward — IPv6 adoption alone hasn’t offset address exhaustion.
- Ignoring total cost of ownership. A lower headline price on a block with a polluted routing history can cost far more in remediation, delisting requests, and reputational damage than the initial savings.
- Overextending on oversized blocks. Buying a /16 when your operations call for a /22 ties up capital and adds monthly holding costs without generating any proportional return.
- Skipping due diligence on RPKI and registry status. Blocks with disputed ownership, pending disputes, or incomplete ROAs can stall transfers for weeks. Sometimes months.
Timing the market perfectly? Impossible. Timing your own procurement cycle correctly is entirely achievable, and frankly, it’s worth more.
Conclusion: Making a Data-Driven IPv4 Purchase
Evaluating IPv4 block price trends isn’t about calling the market with perfect accuracy — nobody can do that. It’s about anchoring your decisions in verifiable data. Compare per-address pricing across regions and block sizes, normalize for routing reputation, and validate everything through registry records and RPKI status before committing capital. Lease rates offer a useful cross-check on whether a purchase price is rational, and historical transfer data tells you whether you’re buying into a rising segment or a softening one.
Working with an established marketplace removes much of the friction and risk. IP4 Market offers verified sellers, transparent pricing benchmarks, and escrow-protected transactions, so buyers can be confident the block they’re evaluating is the block they’ll actually receive. Whether you’re acquiring your first /24 or consolidating a multi-block portfolio, a disciplined, data-driven approach will consistently outperform reactive buying — and position your network for sustainable growth in a market where IPv4 addresses remain one of the scarcest digital assets around. Start with the data. Negotiate from knowledge. And treat every purchase as what it really is: long-term infrastructure investment.
Need IPv4 space? Lease RIPE-verified /24–/22 subnets at a flat €0.50/IP per month — LOA + RPKI/ROA in minutes, instant company verification, automatic renewals. Browse available subnets →